• Brushless Motor maximizing motor efficiency and durability
• Innovative axial fan design that maximizes on air output and run time
• 400 CFM and 90 MPH performance
• Variable trigger and speed lock
• Includes 20V MAX 5.0Ah Lithium Ion Battery, along with charger

• 26,000 RPM motor
• Tool-free bit change
• Dust-sealed switch
• Bright LED light
• Tool only - battery not included

• Brushless motor: requires no brush changes
• Easy-switch protection: for safety purposes, in the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart tool
• Kickback brake: engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages to quickly stop the wheel and shut the grinder off
• Quick stopping: brake stops wheel in 2 seconds or less on average
• DEWALT 3 year limited warranty

• 700 ft.lbs of max torque and 1200 ft.lbs of max breakaway torque
• Compact design of 8-13/16" in length and weighs only 7.2 lbs
• 3/4" hog ring with retention pin anvil
• LED light with 20 second delay for increased visibility in dark work areas
• Baretool item / Battery sold separately

• 8.0 Amp motor delivers high performance in heavy-duty applications
• 3/8-inch ratcheting keyless chuck for greater bit retention
• 0-2,500 RPM, vsr trigger for versatility in drilling and fastening applications
• Soft grip handle design offers increased gripping surface and comfort
• All ball-bearing construction provides greater durability and longer tool life;

• Compact front to back length (only 4 inches) allowing users to fit it into hard to reach spaces
• Multi-grip trigger provides comfort and convenience allowing the user to get into tighter spaces
• Kit includes drill belt hook and 2 Phillips bit. Batteries not included
• Dual speed ranges (0-650/0-2000) rpm for increased user flexibility

• 360 Degree tool free swivel head which allows user to access tight quarters
• Cuts 7/32" strips which continuously curls out of the cutting area providing consistent and accurate cuts
• Cordless shears allows user to take the tool to the work Place
• Backed by dewalt's 3 year limited Warranty

• Brushless Motor and engine design provides the power to drive 3-1/2" nails
• Sequential or bump operating modes
• Dual Speed optimizes the motor for different nail lenghts
• Accepts 30-34 degree paper tape nails, clipped and off set round head

• Low kick back 12" Oregon Bar and chain: for construction and outdoor cutting applications
• HIGH EFFICIENCY BRUSHLESS MOTOR: maximizes run time and motor life and chain guage 0.043,chain speed 25.2 ft/s
• Tool free chain tensioning and Bar tightening knob: for proper Bar clamping force
• Compact and lightweight design: Only 8.8 lbs. for maximum user control and comfort.This is a bare tool item, Battery Sold Separately
• Chain speed:25.2 ft/s

• 15-Inch wide roller material support supports wide work pieces when adjusting and cutting
• Adjustable height from 4-1/4-Inch to 6-Inch to match any miter saw table height
• Compatible with dw723, dwx723 and dwx724 miter saw stands

• Powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
• Three knife cutter-head delivers 30% longer knife life and makes knife change faster and easier
• Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
• Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
• Includes infeed and outfeed tables and an extra set of knives

• Charges all DEWALT 12V and 20V MAX Li-Ion batteries from a vehicle's power outlet
• Enables batteries to be charged while driving to work or on a job site
• Charges the battery in 1 hour or less, minimizing downtime
• Automatic shut-off protects excessive discharge of vehicle's battery
• Diagnostics LED indicator communicates status: charged, charging, power line problem, replace pack, battery too hot or cold

• The product is 6.5A HD VSR Screwdriver
• Easy to use
• Helical-cut steel, heat-treated steel gears for long life and durability
• High power motor for metal fastening applications

• Quickly converts to & from an auto-feed collated screw driving system
• Change screw sizes, driving depth & install/remove the attachment without a tool
• Disassembly release button (for occasional blow-out/cleaning)
• Accepts most major/generic screw strip brands

• 4 foot long flexible shaft for easy use and long reach
• 1- 1/8" diameter vibrator delivers maximum consolidation power
• 14,000 Vibrations Per Minute for maximum consolidation efficiency

• Brushless motor requires no brush changes
• Variable speed rocker switch and variable speed limit switch settings provide options to control speed of the tool
• LED lights at the nose of the tool provide light for the work surface and area
• Dual-position rocker switch provides user options for multiple handle grasping points

• 6.3A 0-4,000 RPM motor
• Soft grip handle
• 2 finger soft grip trigger switch
• Bit tip holder and replacement bit tip included
• Metal gear housing for jobsite durability and increased reliability
• Depth-sensitive, set and forget-nosepiece for consistent fastener depth
• Rubber grip and two-finger trigger for increased comfort and greater control

• 2-1/2" cut capacity cuts up to 2" SCH 40 pipe
• Centered handle position provides superior balance and ergonomics
• LED Work Light with 20 second delay
• Blade tracking adjustment
• Dual bearing blade guide rollers

• Brushless motor for extended runtime and durability
• Active Vibration Control which significantly reduces vibration
• 2.1 Joules impact energy which provides corded power without the cord
• Retractable utility hook for convenient hanging and storage
• Includes (2) 20v Max 5.0ah batteries

• Brushless motor for superior performance
• Heavy-duty impact mechanism with max torque 700 ft./lbs., breakaway torque 1,200 ft./lbs.
• 3-speed selector switch for control
• LED work light
• Able to handle a 6ft drop

• Productivity
• Performance
• Backed by a 3-year warranty
• Lightweight and tough aluminum construction
• Easy on/off

• High performance transmission for fast application speeds and improved run-time
• High efficiency brushless motor delivers up to 57% more run time over brushed
• 0-38,250 BPM for fast drilling in masonry materials
• 3-Mode LED light with Spotlight mode
• Battery sold separately

• Variable Speed Trigger allows for increased control over the flow of your adhesive
• Variable Speed Dial allow for setting maximum and minimum flow rates
• Anti - Drip Feature automatically retracts the plunging rod preventing excess adhesive from dripping out
• Quick Connect Inter-changeable canister trays allows user to quickly change between canister sizes
• Battery and Charger sold separately

• Variable Speed Trigger allows for increased control over the flow of your adhesive
• Variable Speed Dial allow for setting maximum and minimum flow rates
• Anti - Drip Feature automatically retracts the plunging rod preventing excess adhesive from dripping out
• Quick Connect Inter-changeable canister trays allows user to quickly change between canister sizes
• Battery and Charger sold separately

ONLINE ONLY PRICE

• 10 amp motor designed with power to withstand any jobsite application
• 5-inch deep cut capacity for rectangular stock (5 by 4-3/4-inch for round)
• Serviceable steel shroud and rubber bumpers allow guards to withstand jobsite abuse without damage
• LED sight light allows the user to see cut line in dark jobsite environment
• Integrated hang hook allows user to hang the saw without damaging front handle or castings; variable speed dial allows user to vary speed for specific materials and various applications (100-350 sfm)

Durable and versatile, the DEWALT Deep-Cut Portable Band Saw features a powerful 10 amp motor with variable speed control for material-specific and application-specific cutting performance. Also offering an LED sight that indicates the cut line, ergonomic grip options, and an integrated hanging hook, this work-horse saw is packed with little details that make your life easier.

• The product is Oscillating Multi Tool
• Easy to use
• Powerful 3.0 amp motor provides strong cutting and sanding performance
• Quick Change accessory system for quick changes without wrenches