Set your main menu in Appearance > Menus

Search
Search
(618) 259-5133

All Air Products Air Hammer 3000BPM H-3000

Return to Previous Page

Product Description

All Air Products Air Hammer H-2000
All Air Products Air Saw HS-25

All Air Products Air Hammer 3000BPM H-3000

Bore & Stroke(in)   3/4 x 2 5/8

Blows per minute      3000

Add to Wishlist
SKU: H-3000 Category: Tags: ,

Description

Bore & Stroke(in)   3/4 x 2 5/8

Blows per minute      3000

Additional information

Weight 8 lbs
Dimensions 11 × 9 × 3 in

Related Products
All Air Products 3/8″ Air Ratchet RW-175-375
The most popular 1/2 hp ratchet in the business 175 RPM 20 ft lbs of stall torque 80 ft lbs of ultimate torque
All Air Products 3/8″ Reversible Air Drill 788R-25
2500 RPM
All Air Products 16ga. Nibbler NI-16
16 Sheet Steel Capacity(Gauge) 40 inches per minute
All Air Products 5″ Air Grinder 5/8 x 11 9110-5
12,000 RPM Wheel Capacity(in)  5 Wheel Arbor Hole(in)  7/8
All Air Products Needler Scaler B1-NB
This scaler is designed to remove rust, scale, hardened concrete, paint and weld splatter. Used in foundries, shipyards, fabrication shops & construction sites.
All Air Products 4″ Cut Off Tool CO-20S-4
Made in the USA!!!   19,000 RPMs •Higher speed allow you to work faster Steel Guard •Heavy duty steel guard to keep you protected from sparks Tool Specs •Free spin: 19,000 RPM max •Arbor size: 3/8″ •Wheel size: 4 1/16″ •Length: 7 inches
All Air Products 1″ Impact w/6″ Anvil IG-1000-15L
Ring and thru hole retainer 1500 ft lbs of torque by hand
All Air Products Air Saw HS-25
Sheet steel cap (gauge)    12 Stroke(in)   1/4 Strokes per minute    10,000
All Air Products Mini Die Grinder 1000B
30,000 RPM Collet(chuck) size(in)   1/4
All Air Products Straight Line Sander 315
3000 SPM Pad Size(in)  2 1/2 x 15 3/4
All Air Products Gasket Scraper GS-45
Bore & Stroke(in.)    1/2 x 2 1/4 Blow per minute      4500
All Air Products 6″ D/A Sander 864
18,000 RPM Pad Size(in)   6"
All Air Products 1/4″ Air Ratchet RW-270-250
270  RPM 10 ft lbs of stall torque 25 ft lbs of ultimate torque
All Air Products 3/8″ Reversible Angle Drill DAR-60-14
3/8" Reversible Angle Drill Capable of 1800 RPM
All Air Products 1/4″ Die Grinder 2000
25,000 RPM Collet(chuck) size(in)   1/4
All Air Products 18ga Air Shear BS-45-18GA
Use this shear to cut up to 18 gauge mild steel or 18 gauge wire cloth. Useful for cutting thick soft materials such as carpeting, linoleum, foam rubber, etc…
All Air Products 3/8″ Impact 212
Powerful hammer mechanism provides up to 180 ft lbs. of torque.
All Air Products 1/2″ Air Ratchet RW-180-500
180 RPM 30 ft lbs of stall torque 175 ft lbs of ultimate torque
All Air Products 3/4″ Air Impact IP-750-11J
1100 ft lbs of torque by hand Ring  retainer
All Air Products 1/4″ Right Angle Die Grinder 1201F
20,000 RPM Collet(chuck)  size(in)     1/4
All Air Products Ext Length Die Grinder 2080-6
25,000 RPM Collet(chuck) size(in)   1/4
All Air Products 3/8″ Reversible Air Drill Keyless Chuck 788R-25HT
2500 RPM
All Air Products 1/2″ Air Impact IP-500S-DH
Rugged double hammer clutch 400 ft lbs of torque Ring retainer
All Air Products 3/8″ Butterfly Impact 720
Rocking Dog Clutch 360° Swivel Inlet 75 ft lbs of torque by hand
All Air Products 5″ Disc Sander 317R
18,000 RPM Pad Size(in)   5"
All Air Products Mini Needle Scaler NSL-12-60B
12 needles 6000 blows per minute
All Air Products 3″ Air Cut Off Tool CO-20S
Made in the USA!!   20,000 RPMs •Higher speed allow you to work faster Steel Guard •Heavy duty steel guard to keep you protected from sparks Tool Specs •Free spin: 20,000 RPM max •Arbor size: 3/8" •Wheel size: 3 1/16" •Length: 7.38 inches
All Air Products Jitterbug Sander 866
8000 RPM Pad size    3 2/3 x 6 1/2
All Air Products 5″ D/A Palm Sander DAPS-30-5
Dual Action Palm Sanders, provide reduced operator fatigue through vibration dampening design. Features include a composite handle grip, composite rotor, rubber motor isolation mounts & built-in speed control lever. 12,000 RPM 5" pad
All Air Products 1/2″ Reversible Air Drill 788R-5
MODEL RPM CHUCK SIZE. (in.) SPINDLE OFFSET (in.) HP HEIGHT (in.) LENGTH (in.) WEIGHT (lbs.) AIR INLET NPT (in.)
788R-5 500 1/2 7/8 .5 6 9 3.75 1/4
All Air Products Air Hammer H-2000
Bore & Stroke(in)   3/4 x 3 1/2 Blows per minute      2000
© Waltco Tools, Inc. All Rights Reserved | Website Designed By: Mid America Web Solutions
close