Set your main menu in Appearance > Menus

Search
Search
(618) 259-5133

RIGID #440 Square Trailer Tail Light – Right

Return to Previous Page

Product Description

RIGID #421-KR Oval Trailer Tail Light Kit
RIGID #440-15 Replacement Tail Light Lens

RIGID #440 Square Trailer Tail Light – Right

Our most popular trailer tail light. Black plastic body with incandescent lights provides stop, turn, tail and clearance light functions.

Features

  • Combination tail light for trailers under 80 inches wide
  • Includes the following functions: stop, turn, tail, rear reflex, side marker and side reflex
  • 4-1/2 inches square
  • 2-stud mounting – 2 inch centers
  • 12 volt
Add to Wishlist
SKU: 440 Category: Tag:

Description

Our most popular trailer tail light. Black plastic body with incandescent lights provides stop, turn, tail and clearance light functions.

Features

  • Combination tail light for trailers under 80 inches wide
  • Includes the following functions: stop, turn, tail, rear reflex, side marker and side reflex
  • 4-1/2 inches square
  • 2-stud mounting – 2 inch centers
  • 12 volt

Additional information

Weight 1 lbs
Dimensions 3 × 5 × 5 in

Related Products
RIGID #80307 Receiver Hitch Extension
The Receiver Extension is ideal for slide-out campers with extended overhangs.

Specs

Fits 2 inch Receiver
GTW 3,500
TW 300
Length 8 inches - Measured pin hole to pin hole

Features

  • For use with 2 inch receivers only.
  • Hollow shank
Grip #23020 2 Ton Webbing Sling
  • Reduce the chance of damage when lifting polished, soft or painted objects
  • Flat eyes are easy to rig and remove when the load is on the ground
  • Heavy duty polyester webbing will not rot or tear when used in extreme conditions
  • Capacity: 2 Tons [4,000 Pounds]
  • 47" Length 2-1/2" Width
RIGID #440L Square Trailer Tail Light – Left
Our most popular trailer tail light. Black plastic body with incandescent lights provides stop, turn, tail, clearance light functions and license illumination.

Features

  • Combination tail light for trailers under 80 inches wide
  • Includes the following functions: stop, turn, tail, rear reflex, side marker, side reflex and license illumination
  • 4-1/2 inches square
  • 2-stud mounting - 2 inch centers
  • 12 volt
SCC #H5023-4152 Cargo Load Binder 5/16″ to 3/8″ w/ Swivel End Hooks
  • SCC loadbinders meet all DOT/CVSA/CCMTA requirements.
  • Special hook construction supports the load of the chain and will not bind.
  • Heat treated and proof tested with forged heat treated hooks.
  • The Working Load Limit is permanently marked on handle.
  • Working Load Limit 5400lb
RIGID #440-15 Replacement Tail Light Lens
Replacement red lens for Peterson 440 and 441 series tail lights.

Features

  • Fits 440 and 440L Peterson tail lights
RIGID #UB-612-B Class III, IV Hitch Ball Mount 6″ Drop
  • Class I Drawbar applications are specific. The correct replacement Drawbar part number is listed on each RT hitch installation instruction sheet.

Specs

Ball Hole Size 3/4 inch
Drop 1 1/4 inch
GTW 2,000 lbs
TW 200 lbs
Length 6 inch
Rise 1/2 inch
Shank Size 1.25 inch

Features

  • Silver zinc finish
  • 1 1/4 inch shank
Sale
,
Reese 2″ Ball Pintle Combination Receiver #7024100

Great deal on a overstock from factory, lightly scratched.

Pintle Hook & Ball Combination Ball Mount, Fits 2 Inch Square Receiver, 12,000 lbs. Capacity Hook, 2 Inch Diameter Ball, 7,000 lbs. Capacity Ball

PART NO 7024100
Original price was: $79.99.Current price is: $49.99.
Boxer #66142 10mm x 24″ Heavy Duty Bungee Cord
Cable width: 10 mm Cable length: 24 inches
RIGID #RC3 Coupler Lock Lever Style
High-tech materials and state-of-the-art engineering make our tried-and-true Deadbolt locks tough, easy to use andsecure.
  • One piece cold forged steel pin.
  • Strong reversible automotive style key is easy toinsert and remove even with gloves on!
  • Double chrome plate provides automotive gradedurability and corrosion resistance.
  • Unlike conventional 1/4 turn key locks, all locksincorporate the patented Deadbolt screw-and-lock mechanismthat "screws" the lock onto the pin to assure secure,tamper-resistant use.
  • Sealed key cylinder assures full functionality even inthe harshest environments.Fits lever style couplers having a 1/4" pin size. RC4 &RC5 are the only lock for surge brake style couplers.For lever style coupler requiring a 2" opening.
RIGID #PH15 15-Ton Pintle Hook
  • 30,000 lb Maximum Trailer Weight
  • 6,000 lb Maximum Vertical Load
  • Heavy Duty Construction
  • Heavy Duty Design
  • Black Powder-Coated Finish
Bargman #50-85-201 Breakaway System With Maintainer
Meets or exceeds Department of Transportation (DOT) specifications regarding trailer breakaway and holding.requirements.

Specs

Brake Capacity 1 or 2 axle trailers
SCC #H5123-4252 Cargo Ratchet Load Binder 3/8″ to 1/2″ Chain Load Limit 9200lb
  • SCC loadbinders meet all DOT/CVSA/CCMTA requirements
  • Special hook construction supports the load of the chain and will not bind.
  • Loadbinders are heat treated and proof tested with forged heat treated hooks.
  • The Working Load Limit 9400lb and is permanently marked on handle.
Boxer #66224 2″ x 21″ 10k Axle Strap w/ Sleeve
Width: 2 inches Length: 21inches Breaking strength: 10000 lbs Safe working load: 3333 lbs
Security Chain #CC2827 2″ Wide Handle Ratchet with J Hook
All SCC heavy duty 2" cargo strap assemblies are made from premium, yellow, 2,000 Lb. tensile strength tested, polyester webbing for maximum durability. Meets all the requirements of the U.S. Department of Transportation (DOT), Canadian Council of Motor Transport Administrators (CCMTA) and Commercial Vehicle Safety Alliance CVSA). 2" inline strap assemblies come standard with a 12" fixed end. Packaged in shrink wrapped plastic with a circle card.
Boxer #77049 4 Piece 1″ x 6′ 1.2k Cam Buckle Tie Down With S Hook
Width: 1 inch Length: 6 feet Breaking strength: 1200 lbs Safe working load: 400 lbs
Master Lock #377DAT Universal Trailer Coupler Lock, Chrome
  • Universal design fits virtually all trailer couplers from 1 7/8" to 2"
  • Chrome-plated to prevent rust
  • Easy to use
  • Helps prevent theft of trailer when not connected to a tow vehicle
RIGID #22-250 Straight Tongue Coupler 2 1/2″ Tongue Width
A coupler is the connection point mounted on the trailer which connects the trailer to the vehicle. When replacing a coupler there a few things that you have to know. First, what is the hitch ball size for the coupler. Secondly, what type of trailer do you have (Straight Tongue or A-Frame)? Lastly, what is the Gross Trailer Weight of the Trailer. These are the basic questions for finding the correct coupler replacement. Fulton couplers are of the highest quality steel construction featuring: Adjustable lock nut for proper ball tension, Locking hole in coupler handle and Positive locking trigger.
  • Due to the large variety of couplers on the market, always consult an Authorized Dealer before any repairs.

Specs

Ball Size 2 inch
Channel Width 2.5 inch
Rating 3,500 lbs

Features

  • Straight Tongue Coupler
  • 2.5 inch Tongue Width
  • Gray Primer Finish
RIGID #UB-409-B Class III, IV Hitch Ball Mount 4″ Drop
Class III, IV 2 inch shank ball mount with 1 inch ball hole.

Specs

Ball Hole Size 1 inch
Drop 4 inch
GTW 6,000 lbs
TW 600 lbs
Length 9 inch
Rise 2 inch
Shank Size 2 inch

Features

  • Black Powder Coat Finish
RIGID #F2000 Support Foot Pad
Fulton Support Foot Pad F2000-1132 Support Foot Pad Trailer Jack Accessories Support Foot Pad 4 x 6 Inches For Use with Fulton Industrial/Agricultural
Master Lock #378DAT Adjustable Coupler Lock
  • Employs an advanced locking mechanism
  • Features a rubberized plastic body
  • Keeps it rust free
  • Easy to use
  • Backed by a limited life time warranty
SCC #H5121-4158 Cargo Ratchet Load Binder 5/16″ to 3/8″ Chain Working Load Limit 5400lb
  • SCC loadbinders meet all DOT/CVSA/CCMTA requirements.
  • Special hook construction supports the load of the chain and will not bind.
  • The Working Load Limit is 5400lb and permanently marked on handle.
RIGID #22-300 Straight Tongue Coupler 3″ Tongue Width
A coupler is the connection point mounted on the trailer which connects the trailer to the vehicle. When replacing a coupler there a few things that you have to know. First, what is the hitch ball size for the coupler. Secondly, what type of trailer do you have (Straight Tongue or A-Frame)? Lastly, what is the Gross Trailer Weight of the Trailer. These are the basic questions for finding the correct coupler replacement. Fulton couplers are of the highest quality steel construction featuring: Adjustable lock nut for proper ball tension, Locking hole in coupler handle and Positive locking trigger.
  • Due to the large variety of couplers on the market, always consult an Authorized Dealer before any repairs.

Specs

Ball Size 2 inch
Channel Width 3 inch
Rating 3,500 lbs

Features

  • Straight Tongue Coupler
  • 3 inch Tongue Width
  • Gray Primer Finish
RIGID #421-KR Oval Trailer Tail Light Kit
Sealed, incandescent oval stop, turn, and tail light may be used on both curbside and roadside of vehicle or trailer. Kit includes light, grommet, and right-angle plug

Features

  • Legal in either horizontal or vertical position for both U.S. and ECE applications
  • Polycarbonate lens is welded to housing to form single unit
  • Red lens - 12 volt
RIGID #140075 6″ Jack Caster
6 inch poly wheel with zinc plated bracket fits round tube jacks with 2 inch O.D. inner tube. Retaining pin included.

Specs

Rating 1,200 lbs

Features

  • Fits 2 inch jack tube
  • 6 inch poly wheel with zinc plated bracket
  • Includes retaining pin
RIGID #B-18128 Adjustable Tow Ring Assembly
Ductile Iron 3 inch I.D. x 1-9/16 inch Tow Ring, 3 Position Channel and Hardware. Rated 12,000 lbs.

Specs

GTW 12,000 lbs
Ring Diameter 3 inch

Features

  • Ductile iron cast ring
  • 3 inch x 1-9/16 inch ring
  • 3-position adjustable channel
  • 2 grade 5 bolts and nuts
RIGID #UB-208-B Class III, IV Hitch Ball Mount 2″Drop
Class III, IV 2 inch shank ball mount with 1 inch ball hole.

Specs

Ball Hole Size 1 inch
Drop 2 inch
GTW 6,000 lbs
TW 600 lbs
Length 8 inch
Rise 3/4 inch
Shank Size 2 inch

Features

  • Black Powder Coat Finish
Grip #23022 5-Ton 78″ Lifting/Pulling Sling
  • Reduce the chance of damage when lifting objects with polished, soft, or painted finishes
  • Heavy duty, polyester webbing will not rot or tear when used in extreme conditions
  • Easy to rig and remove
  • Length - 78-inch
  • Maximum capacity - 5 tons
RIGID #HB-158451 Swivel Trailer Jack2000#
This item is a Topwind, Bulldog Tongue Jack with a Gray Painted Finish. It has Rolled Acme Threads of Inner Screw which Allows for Smooth, Powerful Cranking.

Specs

Rating 2,000 lbs
Travel 10 inches
Extension 22.7 inches

Features

  • The Heavy Duty Swivel Retaining Ring Allows for Multiple Locking Positions which is Safe and Secure for Operation.
  • The Swivel Jack comes with a Weld-On Tubular Mount for up to a 3 inch x 5 inch Tongue, which includes the mounting hardware, plus a Rugged 6 inch Poly Caster Wheel
RIGID #PFC-1225 2″ Combo Tube
Designed for use in fabricating undercar receiver hitches. 2 inch inner dimension.

Specs

Length 12 inch
Ring Formed

Features

  • Made of cold formed structural tubing.
  • Sized and punched to fit all common weight-distributing Hitch Ball Mounts or Utility Ball Mounts.
RIGID #UB-213-B Class III, IV Hitch Ball Mount 2″ Drop
Class III, IV 2 inch shank ball mount with 1 inch ball hole.

Specs

Ball Hole Size 1 inch
Drop 2 inch
GTW 5,000 lbs
TW 500 lbs
Length 13 inch
Rise 3/4 inch
Shank Size 2 inch

Features

  • Black Powder Coat Finish
Boxer #77059 4 Piece 1″ x 15′ 1.5k Ratchet Tie Down With S Hook
Width: 1 inch Length: 15 feet Breaking strength: 1500 lbs Safe working load: 500 lbs
RIGID #HB-190704 SQUARE JACKS 8,000 LBS
BULLDOG’s 8,000 lbs. support capacity square jack serves the agricultural, industrial, construction, horse/livestock trailer, and utility/cargo trailer markets. We have packed “Big Jack Power” into this compact design! The compact design of these jacks makes them ideal for tight-fitting applications where 3" and 4" square tube jacks are too big! This is a perfect transition from BULLDOG’s round jack product line.
  • Use the painted outer tube as the final finish or primer
  • Zinc-plated inner tube and drop leg
  • 4.7" Outer/inner tube overlap - results in optimal side load performance
  • 5/8" screw stem - provides insurance against screw stem twistng off
  • Patented screw nut stop - prevents screw and/or nut damage when jack is fully extended
  • Topwind models - bushing in top cap, eagle claw grip
  • Sidewind models - 1/4" cross pin connects gear train to screw stem - guards against shearing jack pin
  • Sidewind models - 1:1.33 gear ratio
 
Boxer #66140 10mm x 18″ Heavy Duty Bungee Cord
Cable width: 10 mm Cable length: 18 inches
© Waltco Tools, Inc. All Rights Reserved | Website Designed By: Mid America Web Solutions
close