Set your main menu in Appearance > Menus

Search
Search
(618) 259-5133

RIGID #F2000 Support Foot Pad

Return to Previous Page

Product Description

RIGID #140075 6" Jack Caster
RIGID #HB-158451 Swivel Trailer Jack2000#

RIGID #F2000 Support Foot Pad

Fulton Support Foot Pad F2000-1132 Support Foot Pad Trailer Jack Accessories Support Foot Pad 4 x 6 Inches For Use with Fulton Industrial/Agricultural

Add to Wishlist
SKU: F2000 Category: Tags: ,

Description

Fulton Support Foot Pad F2000-1132 Support Foot Pad Trailer Jack Accessories Support Foot Pad 4 x 6 Inches For Use with Fulton Industrial/Agricultural

Additional information

Weight 15 lbs

Related Products
RIGID #HB-190704 SQUARE JACKS 8,000 LBS
BULLDOG’s 8,000 lbs. support capacity square jack serves the agricultural, industrial, construction, horse/livestock trailer, and utility/cargo trailer markets. We have packed “Big Jack Power” into this compact design! The compact design of these jacks makes them ideal for tight-fitting applications where 3" and 4" square tube jacks are too big! This is a perfect transition from BULLDOG’s round jack product line.
  • Use the painted outer tube as the final finish or primer
  • Zinc-plated inner tube and drop leg
  • 4.7" Outer/inner tube overlap - results in optimal side load performance
  • 5/8" screw stem - provides insurance against screw stem twistng off
  • Patented screw nut stop - prevents screw and/or nut damage when jack is fully extended
  • Topwind models - bushing in top cap, eagle claw grip
  • Sidewind models - 1/4" cross pin connects gear train to screw stem - guards against shearing jack pin
  • Sidewind models - 1:1.33 gear ratio
 
SCC #H5023-4152 Cargo Load Binder 5/16″ to 3/8″ w/ Swivel End Hooks
  • SCC loadbinders meet all DOT/CVSA/CCMTA requirements.
  • Special hook construction supports the load of the chain and will not bind.
  • Heat treated and proof tested with forged heat treated hooks.
  • The Working Load Limit is permanently marked on handle.
  • Working Load Limit 5400lb
RIGID #UB-213-B Class III, IV Hitch Ball Mount 2″ Drop
Class III, IV 2 inch shank ball mount with 1 inch ball hole.

Specs

Ball Hole Size 1 inch
Drop 2 inch
GTW 5,000 lbs
TW 500 lbs
Length 13 inch
Rise 3/4 inch
Shank Size 2 inch

Features

  • Black Powder Coat Finish
Omega #42000C 2000 lbs Capacity Floor Transmission Jack
FEATURES:
  • U.S. patented built-in by-pass device protects hydraulic system from overpumping damage.
  • Multi-adjustment knobs ensure that transmission cradle is always at the right angle to position and accept any load.
  • Load-restraining chain is vital for raising and lowering safety.
  • Four wheels casters allow easy movement, positioning of transmission jack.
SPECS:
  • CAPACITY (lbs.) 2000
  • MIN. HT. 7-7/8"
  • MAX. HT. 33-1/2"
  • HANDLE LENGTH 22-1/2"
  • SADDLE BASE 14-1/4" x 8"
  • EXP. SADDLE BASE 17" x 15-3/4"
  • JACK SIZE L x W 39-3/8" x 19-1/8"
Sale
,
Reese 2″ Ball Pintle Combination Receiver #7024100

Great deal on a overstock from factory, lightly scratched.

Pintle Hook & Ball Combination Ball Mount, Fits 2 Inch Square Receiver, 12,000 lbs. Capacity Hook, 2 Inch Diameter Ball, 7,000 lbs. Capacity Ball

PART NO 7024100
Original price was: $79.99.Current price is: $49.99.
Grip #23022 5-Ton 78″ Lifting/Pulling Sling
  • Reduce the chance of damage when lifting objects with polished, soft, or painted finishes
  • Heavy duty, polyester webbing will not rot or tear when used in extreme conditions
  • Easy to rig and remove
  • Length - 78-inch
  • Maximum capacity - 5 tons
RIGID #UB-409-B Class III, IV Hitch Ball Mount 4″ Drop
Class III, IV 2 inch shank ball mount with 1 inch ball hole.

Specs

Ball Hole Size 1 inch
Drop 4 inch
GTW 6,000 lbs
TW 600 lbs
Length 9 inch
Rise 2 inch
Shank Size 2 inch

Features

  • Black Powder Coat Finish
Boxer #77059 4 Piece 1″ x 15′ 1.5k Ratchet Tie Down With S Hook
Width: 1 inch Length: 15 feet Breaking strength: 1500 lbs Safe working load: 500 lbs
Boxer #66140 10mm x 18″ Heavy Duty Bungee Cord
Cable width: 10 mm Cable length: 18 inches
Omega #10205B 20 Ton Side Pump Bottle Jack
Omega Hydraulic Bottle Jacks are designed for lifting, but not sustaining, loads ranging from 8 tons thru 20 tons depending on the rated capacity of the jack. They are designed to be used vertically. After lifting, loads must be immediately supported by appropriate means. Each model is suitable for use in an appropriately rated and designed vertical or bench press structure. These jacks are not recommended for use in lifting or positioning construction trailers, houses and/or other building structures. These jacks comply with applicable ASME / ANSI Standards. Features:
  • Hydraulic system is protected from internal damage by a patented by-pass mechanism
  • Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
  • Fabricated from hard-cast steel with heat-treated critical stress areas
  • Serrated heat-treated saddle provides generous lifting area and secure grip
  • Heat-treated extension screw allows low pick-up height adjustment and maximum lift height
  • U.S. Patented built-in by-pass device protects hydraulic system from overpumping damage
  • Unique cross-type forged release valve assures positive control
  • A wide, rugged base provides stability and strength
  • Critical stress points are reinforced in all models for added durability and dependability
Specs:
  • Capacity: 20 Ton
  • Min. Height: 9 1/2"
  • Max. Height: 18 5/8"
  • Ext. Screw: 3 1/8"
  • Base Size (L x W): 6 1/4" x 5 7/8"
RIGID #80307 Receiver Hitch Extension
The Receiver Extension is ideal for slide-out campers with extended overhangs.

Specs

Fits 2 inch Receiver
GTW 3,500
TW 300
Length 8 inches - Measured pin hole to pin hole

Features

  • For use with 2 inch receivers only.
  • Hollow shank
Security Chain #CC2827 2″ Wide Handle Ratchet with J Hook
All SCC heavy duty 2" cargo strap assemblies are made from premium, yellow, 2,000 Lb. tensile strength tested, polyester webbing for maximum durability. Meets all the requirements of the U.S. Department of Transportation (DOT), Canadian Council of Motor Transport Administrators (CCMTA) and Commercial Vehicle Safety Alliance CVSA). 2" inline strap assemblies come standard with a 12" fixed end. Packaged in shrink wrapped plastic with a circle card.
RIGID #UB-208-B Class III, IV Hitch Ball Mount 2″Drop
Class III, IV 2 inch shank ball mount with 1 inch ball hole.

Specs

Ball Hole Size 1 inch
Drop 2 inch
GTW 6,000 lbs
TW 600 lbs
Length 8 inch
Rise 3/4 inch
Shank Size 2 inch

Features

  • Black Powder Coat Finish
Boxer #66224 2″ x 21″ 10k Axle Strap w/ Sleeve
Width: 2 inches Length: 21inches Breaking strength: 10000 lbs Safe working load: 3333 lbs
RIGID #PH15 15-Ton Pintle Hook
  • 30,000 lb Maximum Trailer Weight
  • 6,000 lb Maximum Vertical Load
  • Heavy Duty Construction
  • Heavy Duty Design
  • Black Powder-Coated Finish
RIGID #PFC-1225 2″ Combo Tube
Designed for use in fabricating undercar receiver hitches. 2 inch inner dimension.

Specs

Length 12 inch
Ring Formed

Features

  • Made of cold formed structural tubing.
  • Sized and punched to fit all common weight-distributing Hitch Ball Mounts or Utility Ball Mounts.
RIGID #RC3 Coupler Lock Lever Style
High-tech materials and state-of-the-art engineering make our tried-and-true Deadbolt locks tough, easy to use andsecure.
  • One piece cold forged steel pin.
  • Strong reversible automotive style key is easy toinsert and remove even with gloves on!
  • Double chrome plate provides automotive gradedurability and corrosion resistance.
  • Unlike conventional 1/4 turn key locks, all locksincorporate the patented Deadbolt screw-and-lock mechanismthat "screws" the lock onto the pin to assure secure,tamper-resistant use.
  • Sealed key cylinder assures full functionality even inthe harshest environments.Fits lever style couplers having a 1/4" pin size. RC4 &RC5 are the only lock for surge brake style couplers.For lever style coupler requiring a 2" opening.
Boxer #77049 4 Piece 1″ x 6′ 1.2k Cam Buckle Tie Down With S Hook
Width: 1 inch Length: 6 feet Breaking strength: 1200 lbs Safe working load: 400 lbs
Bargman #50-85-201 Breakaway System With Maintainer
Meets or exceeds Department of Transportation (DOT) specifications regarding trailer breakaway and holding.requirements.

Specs

Brake Capacity 1 or 2 axle trailers
RIGID #440 Square Trailer Tail Light – Right
Our most popular trailer tail light. Black plastic body with incandescent lights provides stop, turn, tail and clearance light functions.

Features

  • Combination tail light for trailers under 80 inches wide
  • Includes the following functions: stop, turn, tail, rear reflex, side marker and side reflex
  • 4-1/2 inches square
  • 2-stud mounting - 2 inch centers
  • 12 volt
Master Lock #378DAT Adjustable Coupler Lock
  • Employs an advanced locking mechanism
  • Features a rubberized plastic body
  • Keeps it rust free
  • Easy to use
  • Backed by a limited life time warranty
Omega #10209B 20 Ton Side Pump Bottle Jack (Shorty)
Omega Hydraulic Bottle Jacks are designed for lifting, but not sustaining, loads ranging from 8 tons thru 20 tons depending on the rated capacity of the jack. They are designed to be used vertically. After lifting, loads must be immediately supported by appropriate means. Each model is suitable for use in an appropriately rated and designed vertical or bench press structure. These jacks are not recommended for use in lifting or positioning construction trailers, houses and/or other building structures. These jacks comply with applicable ASME / ANSI Standards. Features:
  • Hydraulic system is protected from internal damage by a patented by-pass mechanism
  • Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
  • Fabricated from hard-cast steel with heat-treated critical stress areas
  • Serrated heat-treated saddle provides generous lifting area and secure grip
  • Heat-treated extension screw allows low pick-up height adjustment and maximum lift height
  • U.S. Patented built-in by-pass device protects hydraulic system from overpumping damage
  • Unique cross-type forged release valve assures positive control
  • A wide, rugged base provides stability and strength
  • Critical stress points are reinforced in all models for added durability and dependability
Specs:
  • Capacity: 20 Ton
  • Min. Height: 6 1/2"
  • Max. Height: 11 1/4"
  • Ext. Screw: 1 5/8"
  • Base Size (L x W): 6 1/4" x 5 7/8"
Omega #10045B 4 Ton Side Pump Bottle Jack
  • Hydraulic system is protected from internal damage by a patented by-pass mechanism
  • Machined and polished cyclinders with die-cut threads provide non-abrasive leak-free, durable performance
  • Fabricated from hard-cast steel with heat-treated critical stress areas
  • Serrated heat-treated saddle provides generous lifting area and secure grip
  • Heat-treated extension screw allows low pick-up height adjustment and maximum lift height
  • U.S. Patented built-in by-pass device protects hydraulic system from overpumping damage
  • Unique cross-type forged release valve assures positive control
  • A wide, rugged base provides stability and strength
  • Critical stress points are reinforced in all models for added durability and dependability
  • Capacity:4 Ton
  • Base Size (LxW):4" X 3 7/8"
  • Min. Height:8"
  • *Max. Height:15 3/8"
Grip #23020 2 Ton Webbing Sling
  • Reduce the chance of damage when lifting polished, soft or painted objects
  • Flat eyes are easy to rig and remove when the load is on the ground
  • Heavy duty polyester webbing will not rot or tear when used in extreme conditions
  • Capacity: 2 Tons [4,000 Pounds]
  • 47" Length 2-1/2" Width
RIGID #421-KR Oval Trailer Tail Light Kit
Sealed, incandescent oval stop, turn, and tail light may be used on both curbside and roadside of vehicle or trailer. Kit includes light, grommet, and right-angle plug

Features

  • Legal in either horizontal or vertical position for both U.S. and ECE applications
  • Polycarbonate lens is welded to housing to form single unit
  • Red lens - 12 volt
RIGID #440-15 Replacement Tail Light Lens
Replacement red lens for Peterson 440 and 441 series tail lights.

Features

  • Fits 440 and 440L Peterson tail lights
RIGID #440L Square Trailer Tail Light – Left
Our most popular trailer tail light. Black plastic body with incandescent lights provides stop, turn, tail, clearance light functions and license illumination.

Features

  • Combination tail light for trailers under 80 inches wide
  • Includes the following functions: stop, turn, tail, rear reflex, side marker, side reflex and license illumination
  • 4-1/2 inches square
  • 2-stud mounting - 2 inch centers
  • 12 volt
RIGID #UB-612-B Class III, IV Hitch Ball Mount 6″ Drop
  • Class I Drawbar applications are specific. The correct replacement Drawbar part number is listed on each RT hitch installation instruction sheet.

Specs

Ball Hole Size 3/4 inch
Drop 1 1/4 inch
GTW 2,000 lbs
TW 200 lbs
Length 6 inch
Rise 1/2 inch
Shank Size 1.25 inch

Features

  • Silver zinc finish
  • 1 1/4 inch shank
Omega #10085B 8 Ton Side Pump Bottle Jack
Omega Hydraulic Bottle Jacks are designed for lifting, but not sustaining, loads ranging from 8 tons thru 20 tons depending on the rated capacity of the jack. They are designed to be used vertically. After lifting, loads must be immediately supported by appropriate means. Each model is suitable for use in an appropriately rated and designed vertical or bench press structure. These jacks are not recommended for use in lifting or positioning construction trailers, houses and/or other building structures. These jacks comply with applicable ASME / ANSI Standards. Features:
  • Hydraulic system is protected from internal damage by a patented by-pass mechanism
  • Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
  • Fabricated from hard-cast steel with heat-treated critical stress areas
  • Serrated heat-treated saddle provides generous lifting area and secure grip
  • Heat-treated extension screw allows low pick-up height adjustment and maximum lift height
  • U.S. Patented built-in by-pass device protects hydraulic system from overpumping damage
  • Unique cross-type forged release valve assures positive control
  • A wide, rugged base provides stability and strength
  • Critical stress points are reinforced in all models for added durability and dependability
Specs:
  • Capacity: 8 Ton
  • Min. Height: 8 7/8"
  • Max. Height: 17 5/8"
  • Ext. Screw: 2 3/4"
  • Base Size (L x W): 4 3/4" x 4 3/4"
RIGID #HB-158451 Swivel Trailer Jack2000#
This item is a Topwind, Bulldog Tongue Jack with a Gray Painted Finish. It has Rolled Acme Threads of Inner Screw which Allows for Smooth, Powerful Cranking.

Specs

Rating 2,000 lbs
Travel 10 inches
Extension 22.7 inches

Features

  • The Heavy Duty Swivel Retaining Ring Allows for Multiple Locking Positions which is Safe and Secure for Operation.
  • The Swivel Jack comes with a Weld-On Tubular Mount for up to a 3 inch x 5 inch Tongue, which includes the mounting hardware, plus a Rugged 6 inch Poly Caster Wheel
Omega #25057 5 Ton Magic Lift Service Jack
Features: * Innovative design of Magic Lift, U.S. Patent No. 5,755,099, offers a quicker lift for professional performance * Heavy gauge construction with rugged universal joint release valve * U.S. Patent No. 5,946,912, a built-in by-pass device protects hydraulic system from over pumping damage * Metered release system allows for precise load control * After the first pump reaches the lifting point, the jack continues with extraordinary lifting speed to raise the load to the desired height * Rolled side frame adds strength and rigidity to reduce twisting Specifications: * Capacity: 5 Tons * Jack Size (L x W x H): 52-1/2 x 17-1/8 x 7-1/4-Inches * Minimum Height: 6-1/2-Inches * Maximum Height: 22-1/4-Inches * Handle Length: 40-1/2-Inches * Saddle Diameter: 6-1/2-Inches * Weight: 203-Pounds
RIGID #140075 6″ Jack Caster
6 inch poly wheel with zinc plated bracket fits round tube jacks with 2 inch O.D. inner tube. Retaining pin included.

Specs

Rating 1,200 lbs

Features

  • Fits 2 inch jack tube
  • 6 inch poly wheel with zinc plated bracket
  • Includes retaining pin
Omega #10125B 12 Ton Side Pump Bottle Jack
Omega Hydraulic Bottle Jacks are designed for lifting, but not sustaining, loads ranging from 8 tons thru 20 tons depending on the rated capacity of the jack. They are designed to be used vertically. After lifting, loads must be immediately supported by appropriate means. Each model is suitable for use in an appropriately rated and designed vertical or bench press structure. These jacks are not recommended for use in lifting or positioning construction trailers, houses and/or other building structures. These jacks comply with applicable ASME / ANSI Standards. Features:
  • Hydraulic system is protected from internal damage by a patented by-pass mechanism
  • Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
  • Fabricated from hard-cast steel with heat-treated critical stress areas
  • Serrated heat-treated saddle provides generous lifting area and secure grip
  • Heat-treated extension screw allows low pick-up height adjustment and maximum lift height
  • U.S. Patented built-in by-pass device protects hydraulic system from overpumping damage
  • Unique cross-type forged release valve assures positive control
  • A wide, rugged base provides stability and strength
  • Critical stress points are reinforced in all models for added durability and dependability
Specs:
  • Capacity: 12 Ton
  • Min. Height: 9 1/2"
  • Max. Height: 18 5/8"
  • Ext. Screw: 3 1/8"
  • Base Size (L x W): 5 1/4" x 5 1/8"
RIGID #22-300 Straight Tongue Coupler 3″ Tongue Width
A coupler is the connection point mounted on the trailer which connects the trailer to the vehicle. When replacing a coupler there a few things that you have to know. First, what is the hitch ball size for the coupler. Secondly, what type of trailer do you have (Straight Tongue or A-Frame)? Lastly, what is the Gross Trailer Weight of the Trailer. These are the basic questions for finding the correct coupler replacement. Fulton couplers are of the highest quality steel construction featuring: Adjustable lock nut for proper ball tension, Locking hole in coupler handle and Positive locking trigger.
  • Due to the large variety of couplers on the market, always consult an Authorized Dealer before any repairs.

Specs

Ball Size 2 inch
Channel Width 3 inch
Rating 3,500 lbs

Features

  • Straight Tongue Coupler
  • 3 inch Tongue Width
  • Gray Primer Finish
Omega #23221C 22 Ton Air Hydraulic Axle Jack
FEATURES:
  • Ton, fits easily and safely between wheels of a tandem axle vehicle.
  • Effortlessly raises saddle quickly, then power lifts to desired height.
  • Handle-top metered-control release valve for easy height adjustment.
  • Quick rated capacity lift using air actuated operation.
  • User friendly self-returning spring minimizes operators effort.
  • A choice of 3 handle angles:
    • 90° -- for space saving storage
    • 45° -- for easy carrying movement
    • 0° -- to access to lifting
SPECS:
  • CAPACITY 22 Ton
  • MIN HEIGHT 9-1/2"
  • MAX HEIGHT 19-1/2"
  • EXTENSION SCREW 4-1/2"
  • HANDLE LENGTH 40-7/8"
  • JACK SIZE 22-7/8" x 12-1/2"
Omega #27036 3 Ton Ton Magic Lift (Quick Lift) Service Jack
MAGIC LIFT SERVICE JACK FEATURES:
  • A revolutionary technology of super-fast lifting speed for professional mechanics.
  • After the first pump reaches the lifting point, the Jack continues with extraordinary lifting speed to raise the load to the desired height.
  • Rugged steel wheels and full swivel ball bearing casters.
FEATURES:
  • Innovative design of MagicLift offers a quicker lift for professional performance.
  • Heavy gauge construction with rugged universal joint released valve for professional performance.
  • U.S. Patented built-in by-pass device protects hydraulic system from overpumping damage.
  • Metered release system allows for precise load control.
  • Fast & Safe! - Extraordinary lifting speed with the One Stroke MagicLift U.S. Patent No. 5,755,099.
SPECS:
  • CAPACITY (ton) 2-1/2
  • MIN. HT. 3-3/4"
  • MAX. HT. 20"
  • HANDLE LENGTH 49-7/8"
  • SADDLE DIA. 5-1/2"
  • JACK SIZE LENGTH 29-3/4"
  • JACK SIZE WIDTH 13-1/4"
  • JACK SIZE HEIGHT 6-1/4"
RIGID #B-18128 Adjustable Tow Ring Assembly
Ductile Iron 3 inch I.D. x 1-9/16 inch Tow Ring, 3 Position Channel and Hardware. Rated 12,000 lbs.

Specs

GTW 12,000 lbs
Ring Diameter 3 inch

Features

  • Ductile iron cast ring
  • 3 inch x 1-9/16 inch ring
  • 3-position adjustable channel
  • 2 grade 5 bolts and nuts
SCC #H5121-4158 Cargo Ratchet Load Binder 5/16″ to 3/8″ Chain Working Load Limit 5400lb
  • SCC loadbinders meet all DOT/CVSA/CCMTA requirements.
  • Special hook construction supports the load of the chain and will not bind.
  • The Working Load Limit is 5400lb and permanently marked on handle.
Omega #22903 Foot Pump (Air Actuated)
  • User friendly foot-actuated design for easy control of moving fluid at tremendous rate. Uses 3/8" NPTF fluid coupler.
  • Provides up to 10,000 PSI with standard shop air supply of 90-175 PSI.
  • Made of durable light weight corrosion-free aluminum.
  • Built-in pressure by-pass system protects overload operation.
  • Efficiently operates any single-acting rams up to 55 ton capacity in many industrial and construction applications.
Specs:
  • Usable Oil Capacity (in3): 91.5
  • Pressure Rating (psi): 10,000
  • Air Pressure Range (psi): 90-175
  • Output Flow Rate (in3/min.) No Load: 67
  • Output Flow Rate (in3/min.) Load: 6.71
  • G.W.(lbs): 20
RIGID #22-250 Straight Tongue Coupler 2 1/2″ Tongue Width
A coupler is the connection point mounted on the trailer which connects the trailer to the vehicle. When replacing a coupler there a few things that you have to know. First, what is the hitch ball size for the coupler. Secondly, what type of trailer do you have (Straight Tongue or A-Frame)? Lastly, what is the Gross Trailer Weight of the Trailer. These are the basic questions for finding the correct coupler replacement. Fulton couplers are of the highest quality steel construction featuring: Adjustable lock nut for proper ball tension, Locking hole in coupler handle and Positive locking trigger.
  • Due to the large variety of couplers on the market, always consult an Authorized Dealer before any repairs.

Specs

Ball Size 2 inch
Channel Width 2.5 inch
Rating 3,500 lbs

Features

  • Straight Tongue Coupler
  • 2.5 inch Tongue Width
  • Gray Primer Finish
Boxer #66142 10mm x 24″ Heavy Duty Bungee Cord
Cable width: 10 mm Cable length: 24 inches
Master Lock #377DAT Universal Trailer Coupler Lock, Chrome
  • Universal design fits virtually all trailer couplers from 1 7/8" to 2"
  • Chrome-plated to prevent rust
  • Easy to use
  • Helps prevent theft of trailer when not connected to a tow vehicle
SCC #H5123-4252 Cargo Ratchet Load Binder 3/8″ to 1/2″ Chain Load Limit 9200lb
  • SCC loadbinders meet all DOT/CVSA/CCMTA requirements
  • Special hook construction supports the load of the chain and will not bind.
  • Loadbinders are heat treated and proof tested with forged heat treated hooks.
  • The Working Load Limit 9400lb and is permanently marked on handle.
© Waltco Tools, Inc. All Rights Reserved | Website Designed By: Mid America Web Solutions
close