• SCC loadbinders meet all DOT/CVSA/CCMTA requirements.
• Special hook construction supports the load of the chain and will not bind.
• The Working Load Limit is 5400lb and permanently marked on handle.

Class III, IV 2 inch shank ball mount with 1 inch ball hole.

Features: * Innovative design of Magic Lift, U.S. Patent No. 5,755,099, offers a quicker lift for professional performance * Heavy gauge construction with rugged universal joint release valve * U.S. Patent No. 5,946,912, a built-in by-pass device protects hydraulic system from over pumping damage * Metered release system allows for precise load control * After the first pump reaches the lifting point, the jack continues with extraordinary lifting speed to raise the load to the desired height * Rolled side frame adds strength and rigidity to reduce twisting Specifications: * Capacity: 5 Tons * Jack Size (L x W x H): 52-1/2 x 17-1/8 x 7-1/4-Inches * Minimum Height: 6-1/2-Inches * Maximum Height: 22-1/4-Inches * Handle Length: 40-1/2-Inches * Saddle Diameter: 6-1/2-Inches * Weight: 203-Pounds

Meets or exceeds Department of Transportation (DOT) specifications regarding trailer breakaway and holding.requirements.

Great deal on a overstock from factory, lightly scratched.

Pintle Hook & Ball Combination Ball Mount, Fits 2 Inch Square Receiver, 12,000 lbs. Capacity Hook, 2 Inch Diameter Ball, 7,000 lbs. Capacity Ball

• SCC loadbinders meet all DOT/CVSA/CCMTA requirements
• Special hook construction supports the load of the chain and will not bind.
• Loadbinders are heat treated and proof tested with forged heat treated hooks.
• The Working Load Limit 9400lb and is permanently marked on handle.

Cable width: 10 mm Cable length: 24 inches

Designed for use in fabricating undercar receiver hitches. 2 inch inner dimension.

• Hydraulic system is protected from internal damage by a patented by-pass mechanism
• Machined and polished cyclinders with die-cut threads provide non-abrasive leak-free, durable performance
• Fabricated from hard-cast steel with heat-treated critical stress areas
• Serrated heat-treated saddle provides generous lifting area and secure grip
• Heat-treated extension screw allows low pick-up height adjustment and maximum lift height
• U.S. Patented built-in by-pass device protects hydraulic system from overpumping damage
• Unique cross-type forged release valve assures positive control
• A wide, rugged base provides stability and strength
• Critical stress points are reinforced in all models for added durability and dependability

• Capacity:4 Ton
• Base Size (LxW):4" X 3 7/8"
• Min. Height:8"
• *Max. Height:15 3/8"

Width: 1 inch Length: 6 feet Breaking strength: 1200 lbs Safe working load: 400 lbs

This item is a Topwind, Bulldog Tongue Jack with a Gray Painted Finish. It has Rolled Acme Threads of Inner Screw which Allows for Smooth, Powerful Cranking.

The Receiver Extension is ideal for slide-out campers with extended overhangs.

Fulton Support Foot Pad F2000-1132 Support Foot Pad Trailer Jack Accessories Support Foot Pad 4 x 6 Inches For Use with Fulton Industrial/Agricultural

Width: 1 inch Length: 15 feet Breaking strength: 1500 lbs Safe working load: 500 lbs

6 inch poly wheel with zinc plated bracket fits round tube jacks with 2 inch O.D. inner tube. Retaining pin included.

Class III, IV 2 inch shank ball mount with 1 inch ball hole.

• User friendly foot-actuated design for easy control of moving fluid at tremendous rate. Uses 3/8" NPTF fluid coupler.
• Provides up to 10,000 PSI with standard shop air supply of 90-175 PSI.
• Made of durable light weight corrosion-free aluminum.
• Built-in pressure by-pass system protects overload operation.
• Efficiently operates any single-acting rams up to 55 ton capacity in many industrial and construction applications.

Specs:

• Usable Oil Capacity (in³): 91.5
• Pressure Rating (psi): 10,000
• Air Pressure Range (psi): 90-175
• Output Flow Rate (in³/min.) No Load: 67
• Output Flow Rate (in³/min.) Load: 6.71
• G.W.(lbs): 20

Replacement red lens for Peterson 440 and 441 series tail lights.

All SCC heavy duty 2" cargo strap assemblies are made from premium, yellow, 2,000 Lb. tensile strength tested, polyester webbing for maximum durability. Meets all the requirements of the U.S. Department of Transportation (DOT), Canadian Council of Motor Transport Administrators (CCMTA) and Commercial Vehicle Safety Alliance CVSA). 2" inline strap assemblies come standard with a 12" fixed end. Packaged in shrink wrapped plastic with a circle card.

• Reduce the chance of damage when lifting polished, soft or painted objects
• Flat eyes are easy to rig and remove when the load is on the ground
• Heavy duty polyester webbing will not rot or tear when used in extreme conditions
• Capacity: 2 Tons [4,000 Pounds]
• 47" Length 2-1/2" Width

• Class I Drawbar applications are specific. The correct replacement Drawbar part number is listed on each RT hitch installation instruction sheet.

FEATURES:

• Ton, fits easily and safely between wheels of a tandem axle vehicle.
• Effortlessly raises saddle quickly, then power lifts to desired height.
• Handle-top metered-control release valve for easy height adjustment.
• Quick rated capacity lift using air actuated operation.
• User friendly self-returning spring minimizes operators effort.
• A choice of 3 handle angles:
  • 90° -- for space saving storage
  • 45° -- for easy carrying movement
  • 0° -- to access to lifting

SPECS:

• CAPACITY 22 Ton
• MIN HEIGHT 9-1/2"
• MAX HEIGHT 19-1/2"
• EXTENSION SCREW 4-1/2"
• HANDLE LENGTH 40-7/8"
• JACK SIZE 22-7/8" x 12-1/2"